Product Line

 

1

New

3kw (110V) and 5Kw(220V)
  • 110V: Designed for locations without 220V, and will provide only a mild temperature increase.
  •  220V: More energy efficient than a 110V unit and gets the water hotter.
  • 4 temperature levels
    Use different settings according to the season and the water flow intensity.
  • Basic electric requirements:
    For 3kW 110V unit - single phase 32 Amp breaker , 4mm T&E.
    For 5kW 220v unit - dual phase 30 Amp breaker, 4mm T&E wire.
  • The unit supplies instant unlimited hot water until unit or water is turned off.
  • Up to 80% energy saving compared to a boiler heater.  Refer to chart on brochure. Energy is used only when the unit is in the on position and if water is flowing through it at a flow greater than 1.2 litres per minute. Lower flow will not activate the unit.
  • Water saving. Compared to a boiler, solar or inline unit, no water is wasted while waiting for hot water to arrive from electric boiler, solar heater or inline.
  • Shower head is able to adjust to maximize water savings, and temperature settings.
  • Time efficient as it takes only 15 seconds to heat water.
Brochure     Brochure
Brochure    Assembly Instructions
Brochure     Manual
Press Plus For More Details
2

Completa

3kw (110V) and 5Kw(220V)
  • 4 temperature level.
    Use different settings according to the season and the water flow intensity.
  • Flow control.
    Used for gentle water temperature control and stable water flow.
  • Digital temperature display. Measures outlet water temperature for user’s comfort.
  • Basic electric requirements:
    For 3kW 110V unit- single phase 32 Amp breaker , 4mm T&E
    For 5kW 220v unit- dual phase 30 Amp breaker, 4mm T&E wire.
  • The unit supplies instant unlimited hot water until unit or water is turned off.
  • Up to 80% energy saving compared to a boiler heater. Refer to chart on brochure.
    Energy is used only when the unit is in the on position and if water is flowing through it at a flow greater than 1.2 litres per minute. Lower flow will not activate the unit.
  • Water saving. Compared to a boiler, solar or inline unit, no water is wasted while waiting for hot water to arrive from electric boiler, solar heater or inline.
  • Shower head is able to adjust to maximize water savings, and temperature settings.
  • Time efficient as it takes only 15 seconds to heat water.
  • Shower set includes:
    1.5 m hose, 4-flow-position rubber nipple shower head , adjustable hanger. Soap dish. Connector to inlet not included.
Brochure     Brochure
Brochure    Assembly Instructions
Brochure     Manual
Press Plus For More Details
3

Inline

Inline 5Kw
  • Entire house multi-function unit: Designed to be connected on house main hot water line. Supplies hot water for the entire house. In the Caribbean, with warm incoming water, it is capable of heating up to 60 feet from unit. Performs best with low flow shower heads. Not designed for baths or hot tubs.
  • Hidden installation.
  • 4 temperature level.
    Varies according to season and intensity of water flow.
  • Basic electric requirements:
    For 5kW 220v unit- 30 Amp Double pole breaker, 4mm T&E wire.
  • Instantaneous unlimited hot water supply.
    The unit supplies instant unlimited hot water in 15 seconds and lasts until unit or water is turned off.
  • Up to 80% energy saving – refer to chart on brochure Energy is activated only when the unit and water are on. Flow must be greater than 1.2 litres per minute.
  • Water saving Instant hot water upon demand !!!!
  • Water Saving device for maximum efficiency included.
    A device connecting to outlet designed to increase heater efficiency is included.
Brochure    Assembly Instructions
Brochure     Manual
Press Plus For More Details
4

Inline

Inline 7Kw
  • Entire house multi-function unit: Designed to be connected on house main hot water line. Supplies hot water for the entire house. Recommended in the Caribbean for areas with colder incoming water temperature such as the mountains. It is capable of heating up to 60 feet from unit. Performs best with low flow shower heads. Not designed for baths or hot tubs.
  • 4 temperature level.
    Varies according to season and intensity of water flow.
  • Basic electric requirements:
    7kW unit - 40Amp Breaker, 6mm
    T&E wire-refer to Manual or assembly instructions on website.
  • Instantaneous unlimited hot water supply.
    The unit supplies instant unlimited hot water in 15 seconds and lasts until unit or water is turned off.
  • Up to 80% energy saving – refer to chart on brochure Energy is activated only when the unit and water are on. Flow must be greater than 1.2 litres per minute.
  • Water saving Instant hot water upon demand !!!!
  • Water Saving device for maximum efficiency included.
    A device connecting to outlet designed to increase heater efficiency is included .
Brochure     Brochure
Brochure    Assembly Instructions
Brochure     Manual
Press Plus For More Details